Wacker Neuson EZ17 Скачать руководство пользователя страница 54

Страница: 54 / 256

4-6

OM EZ17 us 1.0 * ez17i400.fm

Adjusting the retracting seat belt

DANGER

Injury hazard if the seat belt is not fastened correctly or not at all!

Fastening the seat belt incorrectly, or not at all, causes serious injuries or
death.

►

Fasten the seat belt before machine operation.

►

Do not fasten a twisted seat belt.

►

Do not place the seat belt over hard, edged or fragile items in your
clothes.

►

Firmly fasten your seat belt over your hips.

WARNING

Injury hazard due to damaged or dirty seat belt!

A damaged or dirty seat belt can cause serious injuries or death.

►

Keep the seat belt and buckle clean, and check them for damage.

►

Have a damaged seat belt and buckle immediately replaced by a
Wacker Neuson service center.

►

Have the seat belt immediately replaced after every accident and the
bearing capacity of the fastening points and seat fixtures checked by a
Wacker Neuson service center.

WARNING

Accident hazard when adjusting the seat belt during machine
operation!

Adjusting the seat belt during machine operation can cause serious
injuries or death.

►

Adjust the seat belt before machine operation.

►

Ensure that the buckle is inserted (pull test).

Содержание EZ17

































































































































































































































































Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды

Wacker Neuson EZ17, Руководство оператора

Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды