OM EZ17 us 1.0 * ez17w700.fm
7-19
7
6. Remove the electric connector
B
if it is installed on the machine. The
connector is located at the left behind the seat.
7. Install the lifting gear at the points provided for lifting the machine. The
mandatory length
L
is a minimum 1300 mm (51 in).
8. Apply tension to the canopy with the lifting gear.
CAUTION
Crushing hazard due to pre-tensioned canopy!
The pre-tensioned canopy can cause serious injuries.
►
Pay attention to the movements of the pre-tensioned canopy as you
remove the screws.
9. Remove screws
C
on either side.
➥
Raise the seat to improve access if necessary.
NOTICE
Damage to surface due to centering
D
on lower side.
►
Raise the canopy sufficiently as you remove it.
10.2 persons are required for removing.
11.Raise the canopy a little on either side, and raise it out of the anchoring.
B
Fig. 181
L
L
L
Fig. 182
Fig. 183
C
Fig. 184
D
Содержание EZ17
