Wacker Neuson EZ17 Скачать руководство пользователя страница 61

Страница: 61 / 256

OM EZ17 us 1.0 * ez17i400.fm

4-13

Protective FOPS structure/small screen – level I (option)

DANGER

Crushing hazard due to falling objects!

Falling objects cause serious injuries or death.

►

Install a protective FOPS structure in areas with hazard of falling
objects.

►

Machine operation is prohibited without a protective FOPS structure.

Information

The protective FOPS structure corresponds to level I according to ISO
3449:1992

►

The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.

►

The machine owner must ensure that only work is performed that does
not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a machine with
protective structures.

Installing

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Remove all lights and mirrors.

3. A minimum 2 persons are required for installing/removing.

4. Mounting point for protective structure:

5. Install lock nuts and screws on the left and right in positions

and

tighten them to 110 Nm (81 ft.lbs.)

Fig. 56

Fig. 57

Содержание EZ17

































































































































































































































































Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды

Wacker Neuson EZ17, Руководство оператора

Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды