Wacker Neuson EZ17 Скачать руководство пользователя страница 56

Страница: 56 / 256

4-8

OM EZ17 us 1.0 * ez17i400.fm

Adjusting the rearview mirrors (option)

WARNING

Injury hazard to persons in the danger zone!

Persons in the danger zone are possibly not seen and can be injuried
when reversing the machine.

►

Adjust the existing visual aids (rearview mirrors, for example) correctly.

►

Interrupt work immediately if persons enter the danger zone.

►

Pay attention to the movements and changing positions of attachments
and persons.

WARNING

Accident hazard due to restricted field of vision on the job site!

Accidents resulting in severe injuries or death can be caused by a
restricted field of vision.

►

Ensure that no one is in the danger zone.

►

Use suitable visual aids if necessary (camera, mirrors, guide, for
example).

►

Additional equipment or attachments must not be installed if they
impair visibility.

WARNING

Accident hazard due to incorrect adjustment of visual aids!

Incorrectly adjusted visual aids can cause serious injuries or death.

►

Adjust the visual aids before machine operation.

►

Immediately replace damaged or broken visual aids.

►

Curved mirrors enlarge, reduce or distort the field of view. Bear this in
mind when adjusting and using such mirrors.

•

Before using the machine, before starting work or when changing
operators, ensure that all visual aids (mirrors, for example) work
correctly, that they are clean and adjusted in accordance with the
instructions in this Operator’s Manual.

•

The operator must observe the local regulations.

•

Use safety-oriented ladders and work platforms for adjustment work on
the machine.

•

Never use machine parts, attachments or superstructures as a
climbing aid.

Содержание EZ17

































































































































































































































































Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды

Wacker Neuson EZ17, Руководство оператора

Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды