Wacker Neuson EZ17 Скачать руководство пользователя страница 106

Страница: 106 / 256

5-24

OM EZ17 us 1.0 * ez17b510.fm

Hammer operation (option)

Hammer operation may only be performed with a shatter protection in the
defined work range.

– see chapter “ Shatter protection (option)” on page 4-15

The machine is not certified for demolition work according to EN 474-5.

Installing a Front Guard according to EN 474-5 (item 5.3.2.1) is not
possible.

WARNING

Piercing/penetration hazard by objects from the front!

Machine operation involving piercing/penetrating objects from the front
can cause accidents wth serious injuries or death.

►

During operation, all persons must stay clear of the work range of the
machine.

►

Do not place the machine directly underneath the workplace during
demolition, otherwise parts can fall onto the machine or the building
can collapse.

►

Only work in the work range.

►

Machine operation is prohibited without a shatter protection.

WARNING

Accident hazard due to tipping over of machine!

A tipping machine can cause serious injuries or death.

►

Do not perform any demolition work under the machine. This could
cause the machine to tip over.

►

The machine can lose its balance and tip over if a hammer or other
heavy attachment is used.

►

Never turn, lower or set down the attachment abruptly.

►

Do not extend or retract the boom abruptly.

►

Do not use the impact force of the attachment to perform demolition
work. Broken or falling pieces can cause serious injuries.

►

Machine travel is prohibited during hammer operation.

Information

If several sizes of hydraulic hammers are available for the machine, the
following applies when using the Powertilt unit:

►

Always use the smallest possible hydraulic hammer.

►

Contact your dealer for information on the correct equipment.

Содержание EZ17

































































































































































































































































Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды

Wacker Neuson EZ17, Руководство оператора

Результаты поиска

Содержание EZ17

Отзывы:

Похожие инструкции для EZ17

Бренды по названию

Популярные бренды