Vulcan-Hart ML-52163, Руководство по обслуживанию

Страница: 5 / 82

Electric Steamers
MODEL TOTAL KW
AMPERAGE
1 PHASE 3 PHASE 3 PHASE - 4 WIRE
208V 240V 208V 240V 480V
220/380V and
240/415V
VSX24E 24* 116 100 67 58 29 34
VSX36E
24* 67 58 29 34
36 100 878 44 50
42 117
48 116 58 67
VSX42ET
24* 67 58 29 34
36 100 87 44 50
*Standard
Steam Supply
Dry steam must be provided to the steamer. If the
steam is heavy with condensate, a ball float trap must
be used in the line and plumbed in before the pressure
reducing valve. To ensure rapid heat up of heavy cold
loads, the steam supply line must be sized to maintain
pressure as outlined below.
DIRECT STEAM STEAMERS
(POTABLE) REGENERATED STEAM
STEAMERS (*NON-POTABLE)
Supply Pressure 15 psi (max.) 15 psi (max.)
Flow Rate 100 lb. per hour total (min.) 125 lb. per hour total (min.)
Pressure Reducing Valve Output 10 psi (furnished)
set accordingly for good steam
generation but no higher than 15 psi.
(furnished)
*Potable steam is not required for regenerated models but could be used.
Water Supply
Supply pressure should be 20-80 psig
In line strainer for supply line (Not Supplied)
VSX BOILER BASE SERIES CONVECTION STEAMERS - GENERAL
Page 5 of 82 F24627 (0916)