2 Introduction
Figure 5: NetCom Plus 411 POE Rear side
All models with four serial ports look the same on the front side. This side has the connectors for
Ethernet and the serial ports, plus the LEDs. Also here is a plastic cap hiding the position for
a WLAN antenna. The rear side holds the power connector, Reset button and the configuration
switches. Except for NetCom Plus 411 POE there is also the USB 2.0 expansion port. The two
holes for screws may be used as addtional contacts for Protective Earth.
2.3.2.9 NetCom Plus 811
Eight Ports.
Power Requirement
DC 9V to 54V, 800 mA@12V
Power Connector
Terminal Block (
3.7.1
)
Serial Ports
8×RS 232
Serial Speed
180 bps up to 1.0 Mbps
Data bits
7, 8
USB Port
For Expansion of Ports and WLAN
Dimensions
196×147×44 mm (W×D×H)
Weight
900 g
Table 10: Characteristics of NetCom Plus 811
2.3.2.10 NetCom Plus 811 POE
Eight Ports.
Power Requirement
DC 15V to 54V, 800 mA@15V
Power Connector
Terminal Block (
3.7.1
)
Power Alternative
Power over Ethernet PoE 802.3af Class 0
Serial Ports
8×RS 232
Serial Speed
180 bps up to 500 kbps
Data bits
7, 8
Dimensions
196×147×44 mm (W×D×H)
Weight
900 g
Table 11: Characteristics of NetCom Plus 811 POE
Note: RDY (Ready) LED is blue
September 2016
NetCom Plus User Manual
18
