manualshive.com logo in svg

VRmagic Eyesi, Инструкция по установке и эксплуатации, Страница: 6 / 80

Поделиться
Скачать
VRmagic Eyesi Скачать руководство пользователя страница 6

1  General Information

This guide describes the assembly, disassembly, and basic operation of the Eyesi 
Surgical Simulator, as far as relevant for the safe and error-free operation of the 
product. This guide does not describe the simulator software or any issues related 
to the software.

1.1  Further Documentation

 

Â

For information on the administrator interface, please refer to the separate 
administrator guide.

 

Â

For information on training on the simulator as a regular trainee, please refer to 
the separate user guide.

 

Â

For a description of the pre-installed Eyesi Courseware, please refer to the 
separate courseware guide for educators.

1.2  Symbols

 DANGER 

Indicates a hazardous situation which, if not avoided, will result in death or seri-
ous injury.

 WARNING 

Indicates a hazardous situation which, if not avoided, could result in death or 
serious injury.

 CAUTION 

Indicates a hazardous situation which, if not avoided, could result in minor or 
moderate injury.

NOTICE 

Indicates practices not related to personal injury, but possibly related to prop-
erty damage, malfunction, or data loss.

Eyesi Surgical Simulator – Installation and Operating Guide

6

General Information

Содержание Eyesi

















































































Отзывы:

Нет отзывов