VRmagic Eyesi Скачать руководство пользователя страница 27

Страница: 27 / 80

Connect the DisplayPort plug and VRx plug to the corresponding connectors
on the back of the simulator PC (

Fig. 14 on page 26, #2). Be sure to align

the red dots on the VRx plug and VRx connector before pushing the plug into
the connector (

Fig. 15 on page 27).

Fig. 15: Connecting the VRx plug

4.8 Attaching the Microscope Eyepieces

Info

Section only applies to simulators shipped in plastic
transport containers

If the simulator was shipped in cardboard packaging, the eyepieces are already
attached to the microscope arm. In this case, please skip this section.

Info

Malfunction due to mixed up hardware

The optics within the eyepieces and the microscope socket are calibrated and
cannot be used with the hardware of another Eyesi Surgical simulator.

Attaching the microscope eyepieces:

Remove the sealing caps from the eyepieces and microscope socket.

Align the white dots of the eyepiece unit and microscope socket (

Fig. 16 on

page 28, #1).

Installation

Eyesi Surgical Simulator – Installation and Operating Guide

Содержание Eyesi

















































































Результаты поиска

Содержание Eyesi

Отзывы:

VRmagic Eyesi, Инструкция по установке и эксплуатации, Страница: 27 / 80

Результаты поиска

Содержание Eyesi

Отзывы: