VRmagic Eyesi Slit Lamp, Инструкция по установке и эксплуатации, Страница: 9 / 64

2.4 Emissions
Electromagnetic Interference
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
2.5 General Product Safety
Use and handle the device only in accordance with the instructions and information
provided in this guide. Any other use can lead to personal injury, material damage
or damage to the device. Only use the device if all components are in a faultless
condition.
Assembly, commissioning, maintenance and operation may only be carried out by
personnel who have read and understood this manual.
2.6 Transport and Unpacking
The shipping boxes are heavy and could cause injury if carried alone. To avoid per-
sonal injury or damage to the equipment, the shipping boxes should be carried by
two people.
After transport, do not throw away the original packaging (shipping boxes and pack-
aging material). The original packaging is the safest way to transport the simulator.
If the simulator components are very cold from transporting, let them warm up at
room temperature before assembly and operation. Otherwise, condensed moisture
from the air might cause damage to the simulator.
2.7 Installation Location and Ventilation
The simulator is designed for indoor use only. Select a setup location that com-
plies with the ambient conditions specified in the technical data (
Â
section 9 on
page 58). Make sure that the simulator is not exposed to extreme temperatures
or humidity. Never set up and operate the simulator close to highly inflammable
gases.
9
Safety
Eyesi Slit Lamp Simulator – Installation and Operating Guide