VRmagic Eyesi Slit Lamp Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 64

VRmagic Eyesi Slit Lamp Скачать руководство пользователя страница 13

Transport

Transport the simulator in the original transport boxes in which it was delivered.

The packaged simulator is heavy. Trying to move or to lift the simulator on your own
could cause injury or damage to the simulator. The shipping boxes should be trans-
ported with a pallet truck or trolley only. Always place the transport boxes on a level,
stable surface that can securely bear the total weight. Make sure that the transport
boxes cannot fall or be damaged in any other way.

Storage

Observe the storage conditions for the simulator (

section 9 on page 58). We

recommend storing the simulator in its original transport boxes.

Make sure that the storage location is dust-protected and dry. If the simulator is not
in use for a longer time, we recommend covering the simulator hardware to protect
it from dust. Do not store other objects on top of the simulator and ensure that no
other objects can fall onto the simulator.

2.11 Care, Maintenance, and Disposal

Care

If water enters any of the simulator components, there is the risk of death or serious
injury through electrical shock. Further, the simulator might get damaged through
short circuits and resulting heat. Make sure that water does not enter any of the
simulator components. Disconnect all simulator components from power before
attempting to clean them with a damp cloth. Make sure that the simulator does not
get wet while cleaning surrounding areas (e.g. while wet mopping the floor).

Maintenance

Never attempt to make any repairs, manipulations or alterations of any nature to the
simulator. Never open the housings of the simulator components. Doing otherwise
may lead to personal injury and voids the warranty.

Do not use replacements or spare parts not approved by VRmagic. The use of in-
compatible components may involve considerable danger for the user and may
damage your system. In any case, the warranty gets void. Only use VRmagic spare
parts to ensure safe operation of your simulator.

Disposal

All components must be disposed of in compliance with the applicable laws and
guidelines of the corresponding country.

13

Safety

Eyesi Slit Lamp Simulator – Installation and Operating Guide

«
...
11
12
13
14
15
...
»

Содержание Eyesi Slit Lamp

































































Отзывы:

Нет отзывов