21
V
K
140
20
To get the
Kobold VK 140
ready for used, fit
the
HD 40
as shown in the picture..
(FIGURE 7)
To do this, guide the mains plug and lead
through the rod handle.
(FIGURE 8)
Before using the
Kobold VK 140
for the first
time, it is necessary to insert the mains cord
within the rod handle, you do not need to
remove it unless you have to change the
cable.
Slide it down from top to bottom of the rod
handle and insert it in the appliance until
you can hear a click.
(FIGURE 9)
Kobold VK 140
with
HD 40
Assembly & Use
FIGURE 8
FIGURE 9
FIGURE 7
Assembly & Use
Assembly & Use
By winding the mains cord, make sure that
it is rolled in the same direction as shown in
the picture.
(FIGURE 10)
Doing otherwise you might damage the
cable.
Pay attention to possible damages to the
appliance or the connecting cable when
winding it up.
Check that the mains cord can slide
freely through the handle when telescoping.
Do not hold on to the mains cord during
telescoping.
Wind the connecting cable around the two
hooks which are designed for this purpose.
(FIGURE 11)
Remove the plug from the socket before
winding up the mains cord.
Make sure not to crush the mains cord in
the rod handle.
Never try to take out the rod handle from
appliance.
Only unplug the appliance by pulling on
the mains plug, and never by pulling on the
mains cord.
Never carry the appliance with the
mains cord.
FIGURE 10
FIGURE 11
V
K
140
