Vortice VORT PLATT HCS, Инструкция пользователя

Страница: 8 / 32

8
Warning:
This symbol indicates precautions that must be taken to avoid personal injury
!
WARNING - CAUTION ENGLISH
These appliances are designed
for use in residential and
commercial properties.
• Do not use this appliance for functions other than
those described in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged:
If in doubt contact a professionally qualified
electrician or contact Vortice*.
Do not leave packaging within the reach of children
or less able persons.
• Certain fundamental rules must be observed when
using any electrical appliance, including:
a) do not touch it with wet or damp hands;
b) do not touch it while barefoot.
• Do not operate the appliance in the presence of
inflammable vapours (alcohol, insecticides, petrol,
etc.).
• Do not sit on or leave objects on the appliance.
•
This appliance can be used by
children no less than 8 years of
age and by individuals with
limited physical, sensory or
mental capacities, or by
inexperienced or untrained
individuals, provided that they
are supervised or have been
instructed in safe use of the
appliance and understand the
associated risks. Children must
not play with the appliance.
Cleaning and maintenance
procedures that can be
undertaken by the user must
not be entrusted to children,
unless under supervision.
•
The appliance must be
installed by a professionally
qualified electrician.
•
The electrical system to which
the product is connected must
be in compliance with
applicable regulations.
•
An omnipolar switch with a
contact opening distance of 3
mm or higher should be
provided for installation,
enabling complete
disconnection under
overvoltage category III
conditions.
•
Products equipped with three-
phase wiring (T) engines
ALWAYS require connection to
380-415V (or only 400V where
required) three-phase lines, or
also 220-240V (or only 230V
where required). Any kind of
modification shall be
considered as product
tampering and shall nullify the
relative warranty. Products
equipped with single-phase
wiring (M) engines ALWAYS
require connection to 220-240V
(or only 230V where required)
single-phase lines. Any kind of
modification shall be
considered as product
tampering and shall nullify the
relative warranty.