Vortice VORT HR 550 AVEL, Инструкция пользователя

Страница: 20 / 28

20
NOTE: Never touch the exchanger fins, never hold the heat exchanger using the closed sides only.
General cleaning of the unit
It is advisable to occasionally proceed to the verification and eventual cleaning of the fans, the condensate drain and the
internal walls of the unit. These operations must be carried out only by qualified personnel.
To perform the above operations proceed as follows:
- Disconnect the power supply from the unit
- Disconnect the drainage pipe;
- Remove the cover panel from the front of the machine.
- Open the cover by unlocking the fastening hooks;
- Proceed to the verifiaction and eventual cleaning of the fans, and the condensate drain on the walls;
- Close the cover using the fastening hooks on it;
- Connect the unit to the power supply and start it from the side panel.
For cleaning it is possible to use a vaccum cleaner , a rag moistened with water , a soft bristled brush or a low-pressure
compressor.
NOTE: On the blades there are some small little clips for balancing the blades, DO NOT remove them.
IN CERTAIN EUROPEAN UNION COUNTRIES THIS PRODUCT DOES NOT FALL WITHIN THE REQUIREMENTS OF
THE NATIONAL LAWS IMPLEMENTING THE WEEE DIRECTIVE, AND IN THESE COUNTRIES THE PRODUCT IS
NOT SUBJECT TO SEPARATE DISPOSAL OPERATIONS AT THE END OF ITS WORKING LIFE.
Important
This product conforms to EU Directive EU 2012/19/EC.
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of its useful life, it
must not be disposed of as domestic waste, but must be taken to a collection centre for waste electrical
and electronic equipment, or returned to a retailer on purchase of a replacement.
It is the user's responsibility to dispose of this appliance through the appropriate channels at the end of its
useful life. Failure to do so may incur the penalties established by laws governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary damage to the environment and possible related health
risks, and also promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop from which
you purchased the appliance.
Manufacturers and importers fulfil their responsibilities for recycling, processing and environmentally compatible disposal
either directly or by participating in collective systems.
ENGLISH