VorTek SonoPro S34 Series, Инструкция по эксплуатации

Страница: 7 / 83

Series S34 Instruction Manual Chapter 1 Introduction
1-1 M-000-00030
Chapter 1 Introduction
SonoPro
®
Ultrasonic Flow Meters
The VorTek Instruments’
SonoPro
®
Series Ultrasonic flowmeters provide a reli-
able solution for process flow measurement. From the externally mounted trans-
ducers, volumetric flow can be calculated non-invasively.
Multi-Parameter Mass Flow Meters
Mass flow can be determined by using the volumetric flow reading from
the clamp on ultrasonic transducers and measurements from the external
temperature sensors.
Volumetric Flow Meters
The primary sensing elements of the volumetric flow meter are the clamp
on ultrasonic sensors. The analog 4-20 mA output signals offer your
choice of volumetric or mass flow rate. Mass flow rate is based on a
constant value for fluid density stored in th
e instrument’s memory.
Both the mass and volumetric flow meters can be ordered with a local
keypad/display which provides instantaneous flow rate, total, and process
parameters in engineering units. A pulse output signal for remote totali-
zation and frequency output are also available.
SonoPro
®
digital elec-
tronics allows for easy reconfiguration for most liquids. The VorTek Se-
ries
SonoPro
®
Meters’ simple installation combines with an easy -to-use
interface that provides quick set up, long term reliability and accurate
volume or mass flow measurement over a wide range of flows, pressures,
and temperatures.
Using This Manual
This manual provides information needed to install and operate the
Son-
oPro
®
Flow Meter.
•
Chapter 1 includes the introduction and product description
•
Chapter 2 provides information needed for installation
•
Chapter 3 describes system operation and programming
•
Chapter 4 provides information on datalogging
•
Chapter 5 briefly describes the SonoPro® app and its functionality
•
Chapter 6 covers troubleshooting and repair
Appendix A - Product Specifications, Appendix B
– Flow Meter Calcu-
lations, Appendix C – Sound Speed and Pipe Data, Appendix D – Quick
Start-Up Guide, Appendix E – Glossary of Terms