manualshive.com logo in svg

Vorsis AirAura, Руководство пользователя

Поделиться
Скачать
Vorsis AirAura Скачать руководство пользователя страница 36

About DHCP and AirAura 

AirAura does not utilize or support DHCP — Dynamic Host Configuration 
Protocol (or automatically assigned network addressing) — and needs to be 
assigned a “STATIC” network-unique IP address. 
 
 

AirAura Ports and Network Protocols 

AirAura utilizes TCP and UDP protocols to communicate with the remote GUI. 
The TCP protocol is used from GUI to AirAura because its high reliability ensures 
that control changes sent to AirAura will be received without errors. 
 
The UDP protocol is used to send metering and other real time data since 
handshaking is not required. 
 
The TCP protocol utilizes port 

55899

, while UDP uses port 

60001

, and, if 60001is 

busy, it tries the next highest port until an idle one is found, stopping a search 
when it reaches 60010. Both TCP and UDP ports must be open for any through-
the-firewall connectivity. 
 

If UDP Doesn’t Work 

Occasionally a network or internet service provider will block unsolicited UDP 
Ethernet packets. When that happens, the GUI will connect and the processor 
can be controlled but no metering or analysis graphics will be displayed. If this 
happens, navigate to the GUI’s System screen and check the box labeled 
“Metering Data over TCP/IP” and the issue should be solved.  
 

Using GUI Lite 

The GUI may be positioned on the host computer’s screen by left-clicking and 
holding the upper left corner of the GUI and dragging it to the desired position. In 
true “Windows” fashion, the GUI may be minimized on the desktop (taken off the 
screen) and/or closed by way of the familiar controls at the extreme top right. GUI 
Lite may also be resized on the desktop as desired. 
 
Descriptions of the features and functions of the GUI will follow different discrete 
regions of the screen;  
 

it will begin with the Control Area at the top; 
followed by the Input/Output Levels; 
followed by the Dynamic Analysis display; 
ending with the Gain Reduction Displays.  

 
The GUI Lite application that runs on the host Windows PC and the GUI that runs 
on the front panel of AirAura are virtually identical except for the sizing and 
positioning of the graphical analysis and metering displays. Therefore the 
following explanations given for the GUI Lite application also pertain to the GUI 
on AirAura’s front panel. 

 

31

Содержание AirAura


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды