manualshive.com logo in svg

Vorsis AirAura, Руководство пользователя

Поделиться
Скачать
Vorsis AirAura Скачать руководство пользователя страница 20

Audio Inputs 
 

Input audio can be applied to either the analog left/right inputs or to the AES3 
digital input as appropriate. The AES3 input accepts sample rates between 32 
kHz and 96 kHz. 
 
Automatic audio failover from one input to the other is a user selectable option.   
 
Automatic failover from AES3 to analog is instantaneous and based on invalid or 
missing bits in the AES3 stream, or after 30 seconds of “silence” (level below -
48dBFS).  
 
Automatic failover from analog to AES3 is based on the same silence sense 
algorithm responding to audio below -48dBFS for more than 30 seconds. 

 
 
Audio Outputs 
 

FM Audio Outputs 

Output audio for the FM path is available as: 
 

•

  Analog balanced left/right stereo. 

•

  Analog balanced left/right stereo and de-emphasized according to 

any pre-emphasis used. 

•

  AES3 digital, either pre or post diversity delay, and/or de-

emphasized according to any pre-emphasis used. 

•

  Balanced line level composite stereo. 

•

  Unbalanced composite stereo on two rear panel BNC female 

connectors. 

 
HD Audio Outputs 

Output audio for the HD path is available as: 
 

•

  Balanced left/right analog. 

•

 AES3 

digital. 

 

15

Содержание AirAura


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды