VonHaus 3500019 Скачать руководство пользователя страница 4

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

1

INTENDED USE.

Only use the 1600W Router as described 
in this instruction manual. The use of any 
accessory or attachment or performance 
of any operation with this tool other than 
those recommended in this instruction 
manual may present a risk of personal 
injury and/or damage to property. 
This tool is not intended for use by 
persons with reduced physical, sensory or 
mental capabilities, or lack of experience 
and knowledge, unless they have 
been given supervision or instructions 
concerning use of the tool by a person 
responsible for their safety.
Children should be supervised to ensure 
they do not play with the tool.

GENERAL SAFETY INFORMATION.

WARNING!

 Read all safety warnings 

and all instructions. Failure to follow the 
warnings and instructions may result in 
electric shock, fire and/or serious injury.
Please retain all warnings and instructions 
for future reference.
The term “power tool” in the warnings 
refers to your mains-operated (corded) 
power tool or battery-operated (cordless) 
power tool.

ELECTRICAL SAFETY.

Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. There 
is an increased risk of electric shock if 
your body is earthed or grounded.
Do not expose power tools to rain or wet 
conditions. Water entering the power tool 
will increase the risk of electric shock.

WORK AREA SAFETY.

Keep your work area clean and well lit. 
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive 

atmospheres such as in the presence of 
flammable liquids, gases or dust. Power 
tools create sparks which may ignite the 
dust or fumes.
Keep bystanders, children and animals 
away while operating the power tool. 
Distractions can cause you to lose control.

BEFORE USE.

WARNING!

 Know your 1600W 

Router. Do not plug the tool into the 
power source until you have read and 
understood the information in this 
manual. Learn the tool’s applications 
and limitations, as well as the specific 
potential hazards related to this tool, in 
order to reduce the risk of electric shock, 
fire or serious injury. 

WARNING!

 If any part is missing or 

damaged, do not plug the tool into the 
power source or install any accessory 
until the missing or damaged part is 
repaired or replaced. Failure to follow this 
instruction could result in serious personal 
injury.
Do not use a power tool while you are 
tired or under the influence of drugs, 
alcohol or medication. A moment of 
inattention while operating power tools 
may result in serious personal injury.
Use personal protective equipment. 
Always wear eye protection. Protective 
equipment such as a dust mask, non-
skid safety shoes, hard hat, or hearing 
protection used for appropriate 
conditions will reduce the risk of personal 
injury. 

WARNING!

 Contact with, or inhalation 

of, dusts arising from cutting applications 
may endanger the health of the operator 
and possible bystanders. Wear a dust 
mask specifically designed for protection 
against dust and fumes and ensure that 
persons within or entering the work area 

Содержание 3500019





















Отзывы: