MAKING A CUT
11
NOTE:
Before making a cut, ensure the correct
router bit is in place and correctly secured.
Ensure the cutting depth has been adjusted
correctly.
Place the Plunge Base
(16)
onto the work
piece, making sure the bit is not in contact with
the material to be cut.
Turn the Router on by pressing the Lock Off
Button
(5)
while still holding press the On/Off
Trigger
(12)
.
Release the Lock Off Button.
If the On/Off Trigger is release follow the same
steps again to power back on.
Lock the Router in the position at the desired
cutting depth, which will be predefined as
shown on
page 10
.
Follow the Guide to assist when routing the
workpiece.
Lower the Router body into the work piece.
5
12
Содержание 3500019
Страница 1: ...1600W ROUTER 3500019 Instruction Manual...
