VonHaus 3500019, Инструкция по эксплуатации

Страница: 15 / 20

To use the Circular Cutting Guide (23) , Install one of the
Guide Fence Rods into the Plunge Base.
Take the Circle Guide and attach to the opposite end.
Tighten the screw to secure into place.
Place the screw into the Centre of the circle to be cut.
Adjust the router bit as previously instructed on
Page 10 .
Pivot the router around in a clockwise direction.
Taking several passes adjusting the depth each pass.
CIRCULAR CUTTING
TEMPLATE GUIDE
The Template Guide (22) allows for easy following of a
template when cutting copies of a pattern.
The Template Guide is secured into place using the Dust
Extraction Adaptor Bolts & Nuts
(19).
Remove the four screws located on the Plunge Base (16) .
Insert the Template Guide (22) into the recess on the
Plunge Base (16) .
Secure the Template Guide using the four screws
back onto the Plunge Base.
Completely secure into place by also screwing the
Dust Extraction Bolts into place.
Router Base
Template Guide