VonHaus 3500019, Инструкция по эксплуатации

Страница: 12 / 20

USING THE STRAIGHT GUIDE
Bit Rotation
Straight Guide
Feed Direction
Loosen the Guide Fence Locking Screws (27) on the
Guide Fence (26) . v
Insert the Guide Fence Rods (25) through the holes in
the Guide Fence
(26)
.
Tighten the Guide Fence Locking Screws (27) to
secure the Guide Fence Rods
(25)
.
Feed the Guide Fence Rods through the holes on the
Plunge Base
(16) . Adjust the Guide Fence until it is
set at the correct distance from the Router Bit and the
cut to be made.
Secure the Guide Fence into place by
tightening the Parallel Guide Locking Screws
(15/8).
Loosen the Parallel Guide Locking Screws (15/8) .
9