Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 467 / 687

STARTING AND DRIVING
* Option/accessory. 465
4. Locate the "training" button 21 on the
receiver for the e.g. garage door opener. It
is usually located near the antenna bracket
on the receiver.
5. Press and release the "training" button
once. Programming must be completed
within 30 seconds after pressing the but-
ton.
6. Press and release the HomeLink ®
button
to be programmed. Repeat the press/
hold/release sequence a second time. For
some receivers, the sequence may need to
be repeated a third time.
> Programming is now completed and
the garage door, gate, etc. should now
be activated when the programmed
button is pressed.
If you experience any difficulties programming,
please contact HomeLink
®
at:
www.HomeLink.com, or call
1–800–355–3515.
Programming individual buttons
To program an individual HomeLink
®
button:
1. Press and hold the desired button for
about 20 seconds.
2. When the indicator light on HomeLink
®
starts flashing slowly, it is possible to pro-
gram as usual.
Note: If the button you are reprogram-
ming does not program with a new
device, it will return to the previously
saved programming.
Resetting the HomeLink
®
buttons
It is only possible to reset all HomeLink
®
but-
tons at once. It is not possible to reset individ-
ual buttons. Individual buttons can only be
reprogrammed.
–
Press and hold the outer buttons (1 and 3)
on HomeLink
®
for about 10 seconds.
> When the indicator light goes from a
steady glow to flashing, the buttons
have been reset and are ready for
reprogramming.
Related information
•
Using HomeLink
®
*
(p. 466)
• HomeLink
®
*
(p. 463)
• Type approval for HomeLink
®
*
(p. 466)
21 The name and color of the button varies depending on the manufacturer.