Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 466 / 687

STARTING AND DRIVING
* Option/accessory. 464
Programming HomeLink
®
*
20
Follow these instructions to program
HomeLink
®
, reset all programming, or pro-
gram individual buttons.
NOTE
In some vehicles, the ignition must be on
or in the "accessory position" before
HomeLink
®
can be programmed or used. It
can be a good idea to put new batteries in
the remote control being replaced by
HomeLink
®
for faster programming and
better radio signal transmission. The
HomeLink
®
buttons should be reset before
programming.
WARNING
While HomeLink
®
is being programmed,
the garage door or gate being programmed
may be activated. Make sure that no one is
near the door or gate during programming.
When programming a garage door opener,
it is advised to park outside of the garage.
1. Point the remote control at the
HomeLink
®
button to be programmed and
hold it about 2-8 cm (1-3 inches) from the
button. Do not obstruct the HomeLink
®
indicator light.
Note: Some remote controls are more
effective at programming HomeLink
®
from
a distance of about 15-20 cm (6-12
inches). Keep this in mind if you experi-
ence any programming difficulties.
2. Press and hold both the remote control
button and the HomeLink
®
button to be
programmed.
3. Do not release the buttons until the indica-
tor light has stopped flashing slowly
(about once a second) and either flashes
quickly (about 10 times a second) or
glows steadily.
>
If the indicator light glows steadily:
Indication that programming is com-
plete. Press the programmed button
twice to activate.
If the indicator light flashes quickly:
The device being programmed with
HomeLink
®
may have a security func-
tion that requires an extra step. Try
pressing the programmed button twice
to see whether the programming
works. Otherwise, continue with the
following steps.
20 Certain markets only.