Volvo S60 Twin Engine 2020, Руководство пользователя

Страница: 458 / 687

||
STARTING AND DRIVING
* Option/accessory. 456
Installing the ball holder
1. If necessary, remove the cotter pin from
the locking bolt and slide the locking bolt
out of the towbar assembly.
2. Slide the ball holder into the towbar
assembly.
3. Align the hole in the ball holder with the
one in the towbar assembly.
4. Slide the locking bolt through the towbar
assembly/ball holder.
5. Insert the cotter pin in the hole at the end
of the locking bolt.
WARNING
•
Be sure the towbar is securely locked
in position before attaching anything to
it.
•
Always attach the trailer's safety wire
securely to the towbar's safety wire
attachment bracket.
Removing the ball holder
1. Remove the cotter pin from the locking
bolt and slide the locking bolt out of the
ball holder/towbar assembly.
2. Pull the ball holder out of the towbar
assembly.
WARNING
Damage may occur on the towbar if it is
not used correctly or if incorrect or faulty
accessories are used, such as:
•
Overloading of accessory.
•
Use of incorrect or faulty accessory.
•
Accessory used for an incorrect pur-
pose.
•
Use of weight-distributing towing sys-
tem.
•
Incorrectly positioned ball mount; see
geometric limits for the towbar.
Stowing the ball holder
WARNING
When not in use, the detachable ball holder
should always be properly stowed in the
designated location under the floor of the
cargo compartment.
Driving with a trailer
When towing a trailer, the original ball holder
or equivalent should be used.
The ball mount must fall within the geometric
limits for the towbar, for both distance
and
height . Geometric limits are described on a
type plate located on the towbar.
Related information
•
Retractable hitch
*
(p. 453)
•
Driving with a trailer (p. 457)
•
Towing capacity and tongue weight
(p. 660)