9. Measuring
Do not exceed the maximum permitted input values. Do not touch any circuits or parts
of circuits if there could be voltages higher than 50 V ACrms or 75 V DC present within
them. Danger to life!
Before measuring, check the connected measuring accessories for damage such as,
for example, cuts, cracks or squeezing. Never use defective measuring equipment!
Danger to life!
During measuring, do not grip beyond the tangible grip range markings present on the
test prods.
Measuring is only permitted when the battery and fuse compartment is closed.
You may only connect the measuring leads to the measuring device that are required
for measuring operation. Remove all measuring lines not required from the device for
safety reasons.
As soon as “OL“ or “I” (overload) appears on the display, you have exceeded the
measuring range.
a) Switching on the Measuring Instrument
Turn the rotary control (4) to the corresponding measurement function. To switch off turn the
rotary control to “OFF”. Always turn the device off when it is not in use.
Prior to working with the meter, you have to insert the enclosed battery. Insertion and
changing of the battery is described in the “Cleaning and Maintenance” chapter.
56
