77
18. Warning Messages on the Display
Warning Message on the Display
Description
"INT. TEMP TOO HIGH"
The temperature of the charger is too high. Check the fans if required.
"EXT. TEMP TOO HIGH"
The temperature measured at the rechargeable battery via the external
sensor is too high.
"DC IN TOO LOW"
The input voltage (operating voltage) for the charger is too low (< 11.0
V).
"DC IN TOO HIGH"
The input voltage (operating voltage) for the charger is too high (> 18.0
V).
"OVER TIME LIMIT"
The set time limit for charging (see chapter 15) has been exceeded.
"OVER CAPACITY LIMIT"
The set capacity limit (see chapter 15) has been exceeded.
"REVERSE POLARITY"
The rechargeable battery was connected with reversed polarity.
"CONNECTION BREAK"
The connection to the rechargeable battery has been disrupted, e.g. if
the battery has been disconnected during the charging process.
"CELL NUMBER ERROR"
The set cell number is wrong.
"BALANCE CONNECTOR ERROR"
The balancer connection of the rechargeable battery has been con-
nected incorrectly or with reversed polarity.
"NO BATTERY"
No rechargeable battery is connected or the rechargeable battery has
not been recognised (e.g. defective/deep discharged).
"CONNECTION ERROR"
The rechargeable battery has been connected incorrectly or the charg-
er recognises doubtful values.
"BATTERY WAS FULL"
The connected rechargeable battery is fully charged. If required, check
the cell number settings.
