Vollrath FC-6IH-01120, Руководство оператора, Страница: 4 / 36

4 Modular Induction Dry Well Drop-ins Operator’s Manual
OPERATION (CONTINUED)
Plug in the Equipment
Plug the equipment into a grounded electrical outlet that matches the rating on the name plate.
NOTICE: Using a voltage other than the nameplate rated voltage, or modifying the power cord or electrical components,
may damage equipment and will void the warranty.
NOTICE: This equipment requires a dedicated electrical circuit.
Turn On Main Power
The Display Will Show
Multi-well drop-ins Single well drop-ins
1. Press to turn on power to the drop-in.
2. The induction capsules and wells will default to the settings from the
previous use.
1. Press to turn on well.
2. The induction capsules will default to the settings from the previous
use.
Display Description Status
The display for one or both induction
capsules shows a
STEADY temperature or
power level.
A Vollrath induction-ready pan is making contact with induction capsule
and the capsule is warming the pan.
The display for one or both induction
capsules show
OFF .
Power to the corresponding induction capsule is turned off.
The display for one or both induction
capsules is
FLASHING a temperature or
power level.
There is not a pan in the well.
There is a 2
¹⁄₂
" inch deep pan in the well but the induction capsule is set
for a 4" deep pan, therefore the pan is not detected. See “Adjust the
Induction Capsules to Accommodate the Pan(s)” on page 3.
The display for one or both induction
capsules is
FLASHING BAD PAN .
The pan in the well is not a Vollrath induction-ready pan. See “Insert
Pans of Prepared Hot Food” on page 3.
The Vollrath logo on the control panel(s)
and main power switch (multi-well drop-ins
only) will illuminate and remain lit while the
drop-in is plugged in, even if the induction
capsules are turned off.
or
160
160
HI
HI
OFF
160
160
160
HI
HI
or
BAD
160
PAN
160