VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
Example:
Switch#date 080112202007
8.3.3.10 System Contact
Displays contact information regarding the Switch. This is an RFC-1213-defined MIB
object in System Group, and provides contact information on the managed node.
CLI Syntax:
snmp-server contact WORD
Example:
Switch(config)#snmp-server contact [email protected]
If the user puts the contact info in the contact description field, the Switch’s contact info
will change to the new info.
8.3.3.11 System Location
Displays the physical location of the switch. This is an RFC-1213-defined MIB object in
System Group, and provides the location information on the managed node.
CLI Syntax:
snmp-server location WORD
Example:
Switch(config)#snmp-server location Central-Building
Type in the new location description in the location description field.
8.3.3.12 IP Address and Network Mask
Displays the Switch’s IP address. This IP address is used for managing purposes, i.e.;
network applications such as, the http server, SNMP server, tftp server, ssh and telnet
server of the Switch are all using this IP address in interface vlan1.
CLI Syntax:
ip address A.B.C.D/M
Example:
Switch
(config)#interface vlan 1
Switch
(config-if)#ip address 192.168.20.121/24
8.3.3.13 Reboot
Use this command to reboot the system.
CLI Syntax:
reboot
Example:
Switch
(config)#reboot
8.3.3.14 Reload
Use this command to copy a default-config file to replace the current one.
CLI Syntax:
reload default-config file
Example:
Switch
#reload default-config file
82
