VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
Dynamic Addresses
7.7.9 Static
Addresses
The user can add a MAC address to the switch address table. The MAC address added
in this way will not age out from the address table. These are called static addresses.
MAC Address:
enter the MAC address
VLAN ID:
enter the VLAN ID that the MAC belongs to
Stack ID:
For a standalone switch, only ID 1 is available
Port Selection:
select the port which the MAC belongs to
Click
Add
to create a new static MAC address with the above information (temporary
until
Submit
is clicked). Click
Remove
to remove a selected entry (temporary until
Submit
is clicked). Click
Modify
to update an existing MAC address entry (temporary
until
Submit
is clicked).
Click
Submit
to save changes to RAM memory. Click
Refresh
to view effect of changes.
To eventually make all changes permanent in Flash memory, go to
Save Configuration
page
(bottom of management menu) and click
Save
.
56
