VOLKTEK NSH-580 MANAGED 24-PORT 10/100 + 4 G COMBO L3 SWITCH
7.3 Physical
Interface
7.3.1 Port
Status
7.3.1.1 Interface
Configuration
The
Physical Interface
displays the Ethernet port status in real time. You can configure
the port in the following fields in Interface Configuration Window:
Port:
select the port to configure
Status:
disable/enable the port
Mode:
set the speed and duplex mode
Flow Control:
enable/disable 802.3x flow control mechanism
DHCP-Snooping:
enable/disable DHCP snooping function
Snooping:
assign the selected port to be a trusted or not trusted port
Select the corresponding port number and configure the port setting, then click on the
Modify
button. The field you change will update the content of the display window.
However, the new settings do not take effect until the
Submit
button is clicked.
Click
Submit
to commit the settings. Click
Refresh
to display current settings of the
Switch.
To eventually make all changes permanent in Flash memory, go to “
Save
Configuration
”
page
(bottom of management menu) and click
Save
.
Physical Interface – Interface Configuration
7.3.1.2 Runtime
Status
This window
displays the following information for each port:
28
