Volkswagen VAS 6321 A, Инструкция по использованию

Страница: 54 / 68

C B R a l u m i n u m h a m m e r s
54
21. CBR aluminum hammers
21.1 The CBR aluminum hammers and plastic wedges
The scope of delivery of the VAS 6321 A includes three different aluminum hammers, one wide and one narrow plastic wedge.
The hammers differ not only in size, but also in the different position of their fins - these are arranged vertically or horizon-
tally to the hammer handle. The hammers are used for dent removal and as chisels for easing out edges or beads as well for
knocking out surfaces.
Application
„
The hammers are mainly used to remove stresses in the surface and to stabilize edges.
„
Either the transverse or the longitudinal fin can be attached to stabilize edges, depending on the angle of access. If
required, the pointed side of the plastic wedges can also be used here.
„
Use a second hammer to hit the hammer that is placed on the surface.
Please note: There is no danger from splintering parts as there is with steel hammers!
„
The surfaces of aluminum hammers and the aluminum hammer with the rubber cap are excellent for easing out
surfaces and minor damage to edges.
„
The wide sides of the plastic wedges can also be used as “dampers” between the hammer and the sheet metal.