Volkswagen VAS 6321 A, Инструкция по использованию

Страница: 14 / 68

Th e VA S 6 3 2 1 A at a g l a n c e
14
The VAS 6321 A consists of the components listed below. Their use and application is described in more detail in this
usage information:
*
without illustration
VAS 6321 A / 5 CBR EasyTool, each with three round and three PSuare feet, and four straight feet
1
CBR-ZH-01 CBR hand puller
2
CBR-ZH-02 CBR slide hammer
3
H01-HG CBR small dent removal hammer with removable rubber cap
4
H03-H CBR large dent removal hammer with horizontal fin
H03-V CBR large dent removal hammer with vertical fin
CBR-029 VAS 6321 A trolley for manageable storage of the individual components
5
VAS 6321 A / 7 CBR LineTool 160 with pulling unit and double pull hooks, two single and two double feet
7
VAS 6321 A / 13
PowerInverter with MultiTool (automatic) and connection cable, ground cable with ground clamp and
connection cable for EasyTool
8
CM-024 BitCutter
9
CM-023 Equipment for paint removal
10
CMA-121-1/2/3 CBR double pull hook / triple pull hook / rotating pull hook
11
CSH-65-0150-80 L-dent removal bracket
12
VAS 6321 A / 8 CBR LeverTool with a single and a double foot, and a pull carriage with double pull hook
14
VAS 6321 A / 4 CBR StrongTool with two single and two double feet and double pull hook
15
CBR-U-B14/B12/
B22/B10
Carbon electrode / Copper electrode – Ball / Copper electrode – Flat / Bit holding electrode – Narrow
20
CM-060 Various small parts and accessories *
CM-025 CBR pull rods diameter 7 mm *
CM-026 CBR pull rods diameter 8 mm *