Volkswagen VAS 6321 A, Инструкция по использованию

Страница: 46 / 68

C B R L e v e r To o l ( VA S 6 3 2 1 A / 8 )
46
14.1 Working with the CBR LeverTool
The LeverTool is mostly used where there is only one way of providing support.
The LeverTool can be used for pushing or pulling, and it can be converted to one or the other use in just a few steps by
exchanging the foot and the pulling carriage.
The LeverTool can be used to pull deep deformations out of surfaces quickly.
Please note: Unlike the StrongTool and LineTool, the LeverTool cannot be locked into place under tension.
When using the StrongTool and LineTool for dent removal work, the LeverTool is often an ideal extra tool for fast removal of
eliminating and remaining deformations around the edges.
Insert with single foot when pressing
Insert with double foot when pulling
Insert with single foot when pulling
Insert with double foot when pressing
In the picture on the left, you can see the way the technician
is holding the LeverTool in tension with his body and releas-
ing the residual tension in the sheet metal with the alumi-
num hammer. The StrongTool is completely under tension.