Volkswagen VAS 6321 A, Инструкция по использованию

Страница: 59 / 68

C B R E a sy To o l g l u e t e c h n o l o g y ( VA S 6 3 2 1 A / 1 1 )
59
23.3 Equipping the EasyTool with the adhesive system
On the upper cable holder on the left side of the VAS 6321 A trolley there is a punched out hexagon. Plug the welding
shrinking tip into the punched hole and loosen the nut behind it using a 17 mm open-end wrench. Twist off the welding tip
and screw the pad adapter onto the M10 thread of the EasyTool. Tightening the adapter by hand is sufficient.