13
4.1 DELIVERY
Due to the weight of the appliance it may be necessary for
two people to lift and attach the appliance to its mounting. The
appliance is contained within a heavy-duty cardboard carton.
Lay the carton on the
fl
oor with the writing the correct way up.
4.2 CONTENTS
Contained within the carton is:
the boiler
the wall bracket
carton template
an accessories pack containing appliance service connections
and washers
the instruction pack containing the installation, servicing & user
instructions, guarantee registration card and a 3-amp fuse.
4.3 UNPACKING
At the top of the carton pull both sides open – do not use a
knife – unfold the rest of the carton from around the appliance,
carefully remove all protective packaging from the appliance and
lay the accessories etc. to one side. Protective gloves should
be used to lift the appliance, the appliance back-frame should
be used for lifting points.
4.4 PREPARATION FOR MOUNTING THE AP-
PLIANCE
The appliance should be mounted on a smooth, vertical, non-
combustible surface, which must be capable of supporting the
full weight of the appliance. Care should be exercised when
determining the position of the appliance with respect to hidden
obstructions such as pipes, cables, etc.
When the position of the appliance has been decided – using
the template supplied – carefully mark the position of the wall-
mounting bracket (see
fi
g. 10) and
fl
ue-hole (if applicable).
4.4.1 FITTING THE PRE-FIXING JIG
When the position of the appliance has been decided – using
the template supplied – carefully mark the position of the wall
mounting bracket/pre-
fi
xing jig (see
fi
g. 10) and
fl
ue-hole (if
applicable). Once the pre-
fi
xing jig is in place, the pipework
can now be
fi
tted. Fit the pipework to sit within the pre-formed
guides of the
fi
xing jig and to the required length for ether a
standard wall or standoff bracket (see
fi
g 10).
Once the pipes have been
fi
tted, the jig can now be removed
(see
fi
g 13).
SECTION 4 - INSTALLATION
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
without
rear spacer kit use position 2
with
rear spacer kit use position 4
2
2
2
2
2
2
4
4
4
4
4
4