Voce PR14037000, Руководство оператора

Страница: 23 / 68

Secti
o
n
4
–
Clean
in
g and
R
e-
fil
lin
g P
ro
cedu
re
19
4.5.9 Cup Check
Check the levels of the cups in the cup turret and where necessary, refill with correct sized cups.
Allow the cups to drop into the tubes directly from the packaging. DO NOT touch the cups with
your hands.
Important: Do not fill the tube directly above the cup dispense position. Allow the cup turret
motor to rotate a full tube to the cup dispense position when the machine is powered up.
Rotating the cup turret by hand will damage the mechanism.
Note: If paper cups are being loaded, each pack of cups must first be inspected for damage to
the cup rims. Damaged cups must not be used.
4.5.10 Cash Box
Un-lock the cashbox (if fitted) located on the rear of the door and remove from the machine.
Empty contents from the cashbox. Refit the cashbox to the machine, turning the lock to secure.
Check the coin tubes and refill if required.
4.5.11 Test
Using the service keypad located in the rear of the door, proceed as follows:
1. Press the Cup Test button (7) and check that a cup is
ejected correctly from the Cup drop unit.
2. Press the Park Head button (8) to ensure that the
dispense head operates correctly and that the dispense
pipes are fitted correctly.
3. Place a suitable container under the dispense head and press the Rinse/Flush button
(3) . The machine will flush the system. Check that none of the mixing stations leak.
Empty the contents of the container.
4. Place an empty cup under the dispense head. Press the Test Vend button (6) and
using the selection buttons on the front of the machine, vend a drink to ensure that
the machine operates correctly.
Press the “X” (Exit) key to exit from the Test Vend menu.
5. Press the View Counters button (5) and record the audit information displayed on the
LCD ( see sub-section 5.5 Button 5 - View Counters for full details ).
4.6 Oltre Brewer Cleaning Procedure
4.6.1 Daily Cleaning Procedure
Important: It is necessary to carry out the cleaning and maintenance procedure outlined on the
following pages on a regular basis, either at the end of the day or at the start of the day before
the machine is in constant use.