Voce PR14037000 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 68

Voce PR14037000 Скачать руководство пользователя страница 47

Secti

o

n

7

–

Operat

o

rs

P

ro

gram

43

Data Transfer Standard (EVA-DTS) - Overview:

The standard makes it possible to transfer

information  from  vending  machines/payment  systems  to  PC-based  accounting/management
systems  and/or  the  opposite  way.  It  is  important  that  all  suppliers  of  vending  machines  and
payment  systems  agree  to  a  common  standard  for  the  Electronic  Data  Transfer,  because  only
this way the operator can be sure that all his equipment can be read out and programmed by
means of the same handheld terminal.

1.

DTS Standby Mode:

Scroll down and highlight DTS from the System Settings menu.

Press the

↵

(Edit) key to access the menu. The LCD will display the screen as shown.

The first sub-menu DTS Standby Mode is highlighted with its current state (DDCMP)
shown in the bottom line.

The machine is factory set to enable data transfer via the optical DDCMP link. To
change this to the DEX setting, press the

↵

(Edit) key to access the menu and the

▲

(up) key to select DEX indicated by the filled radio button. Press the

↵

(Edit) key to

save the selection.

N.B.

Even if the default is set to DDCMP, once the controller detects a DEX activity, it

will automatically switch to the other mode. However, setting the default to the
correct protocol will speed up response time.

The operator can now download data from the machine by plugging a DEX enabled
device into the DEX port (J36) on the I/O board, located on the rear of the door.

2.

DTS Audit List:

From this sub-menu the

operator can select which data is transferred
from the machine to a DEX/DDCMP data carrier.
Scroll down and highlight DTS Audit Data. Press
the

↵

(Edit) key to access the menu. The LCD will

display the screen as shown.

All data and events fields within a vending machine are assigned a unique code
determined by the Standard. From this sub-menu the operator can choose to allow all
fields to be available for download by pressing the START/? key or scrolling through
the list and adding an

X

to the required fields.

3.

CA304 Data Type:

This sub-menu determines whether the the data will be displayed

as currency or numerical, for example, assuming that the value of pound coins in the
machine is £3.00, when set to currency CA304 will read 300 in the DEX/DDCMP
report. When set to numeric it will read 3.

4.

Data Reset Mode:

This field can be set to either AUTO or SAVE from within the sub-

menu. When set to AUTO, all resettable data will be reset after a successful read.

5.

Event Reset Mode:

This field can be set to either AUTO or SAVE from within the sub-

menu. When set to AUTO, all event data will be reset after a successful read.

6.

Printer Baud Rate:

This allows the operator to set the correct baud rate for a serial

printer if one is to be used. It is important for this to be set correctly to ensure
successful data transfer.

«
...
45
46
47
48
49
...
»

Содержание PR14037000





































































Отзывы:

Нет отзывов