5.4
Turn the bypass slowly to “service” mode. Open the main valve when you do
not use a Bypass.
5.5
Open a tap behind the softener so a flow runs through it. Some air may flow
from the tap; this comes from the softener. This will happen only once; at
start-up. Once only water flows from the tap, and no more air, close the tap.
5.6
Perform a manual regeneration.
5.6.1
Choose one of both units to perform a manual regeneration. Use a hex key
number 5 to turn the program disk (PRG) manually.
Turn PRG counter clockwise until it is in above position. When the arrow and
the small line on the transparent cover reach the area marked by “B”
