(brining), the regeneration will start. Immediately, the PRG will drop down a
little (you will be able to see and hear this). “R” stands for refill (refilling the
container with water at the end of the regeneration stage). To make sure the
softener is in regeneration, there should be a small water flow to the drain,
and the water level in the container should drop.
5.6.2
Let regeneration perform until it stops automatically. The estimated time is
approx. 12 minutes. When regeneration has stopped, no more water flows to
the drain. This is a clear indication that the regeneration stage is over.
5.6.3
Open a tap behind the softener for several minutes to allow residual water to
be flushed from the tubing.
5.6.4
Check outgoing hardness with a “hardness test kit” (not supplied by evo-
water). Adjust blending if necessary.
5.7
Put the cover on to the container. Before you do this, make sure that the tilt
drawer for the salt is closed.
Do not forget to connect the overflow
with a drain.
