Vmac V900093, Руководство по установке

Страница: 30 / 48

VMAC
–
Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
28
□
Install the skid plate using the OEM bolts.
□
Align the holes in the skid plate with the threaded holes on the
cooler mounting plate and fasten the cooler in place with four
5/16 inch bolts and flat washers.
□
Connect the 90 degree end of the short 1/2 inch hose to the
passenger side fitting on the cooler. Tighten the fittings at the
cooler.
Connecting the 90 degree ends of the cooler hoses can
be done easily from above.
5.2 Installing the Main Bracket
□
Place the replacement metal coolant tube (Figure 5.2) in position
with the upper bracket facing the front of the truck so that it will
fasten to the rear passenger-side air conditioning compressor
mount with the OEM fastener.
If the truck does not have air conditioning, use the supplied
spacer and bolt to fasten the bracket to the rear passenger-side
air conditioning compressor mount on the VR main bracket.
Figure 5.2
□
Install the OEM O-ring and thermostatic switch from the top
engine coolant tube to the replacement tube and insert it into the
thermostat housing. Make sure that the O-ring is properly
seated.