Vmac V900093, Руководство по установке

Страница: 39 / 48

VMAC
–
Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
37
Part 6: Finishing the Installation
6.1 Before Starting the Engine Checklist
Make sure that the following have been completed:
□
Check the vehicle coolant.
□
Check the compressor oil level.
□
Do a final inspection to make sure that everything has been
completed and tightened.
□
Perform a final belt alignment check.
□
Check all wiring for security and protection.
6.1.1 Safety Test
□
Place the automatic transmission in Park or manual transmission
in neutral and apply the park brake.
□
Turn the ignition key “ON” but do not start the engine.
□
Check the control box to see if there is a number showing in the
hour-meter. If there is no display, there is no power to the control
box.
□
Push the “ON” button on the control box. The green LED should
come on and you should hear the compressor clutch engage.
□
Release the park brake. The green LED should flash, the display
should read “PARK BRAKE” and the compressor clutch should
disengage. Apply the park brake again; the green LED should
go out and the hours will be displayed.
□
For trucks with automatic transmissions, the engine must be
running to complete the final step in the safety test. This will be
done after the pre-start checks have been completed.