Vmac V900093, Руководство по установке

Страница: 34 / 48

VMAC
–
Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
32
□
Re-install the compressor inlet valve.
If the bolts used to attach the inlet valve to the air end
are installed incorrectly major damage to the air end can
occur.
It must be noted that most systems use two different
length bolts in the inlet valves. The longer bolts go in
the two holes closest to the air filter and the two shorter
bolts go in the holes furthest away from the air filter
(figure 5.6).
Figure 5.6
Never use an impact wrench to install inlet bolts.
The torque spec for inlet bolts is 19 ft lbs.
□
Remove the two OEM driver side upper rocker arm cover bolts
(Figure 5.7).
Do not remove the OEM bushings holding the cover
down.
□
Move the electrical components and tie strap them out of the
way as required.
□
Apply Loctite to the M6 x 35mm bolts and the M8 nut and install
the strut support (Figure 5.7). Torque the two M6 bolts to 71 in-
lbs.
!
!