Vmac V900093, Руководство по установке

Страница: 38 / 48

VMAC
–
Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201
36
□
Route the two grey wires and the white wire with the plug
connector across the engine to the compressor. Connect the
wires to the matching connectors at the compressor.
5.5 Adding Oil to the System
You must use the VMAC supplied compressor oil in this
system. Failure to use this special oil will result in
damage to the compressor and will void your warranty.
□
Remove the fill plug from the air inlet control valve and pour oil
into the oil fill hole on the inlet control valve using a funnel. Turn
the compressor clutch clockwise with a ratchet and a 1/2 inch
socket using the hex head bolt at the centre of the compressor
clutch during the fill process.
□
Allow 5 minutes for the oil to drain into the tank, then check the
level at the sight glass at the front of the tank. Continue adding
oil until the level is correct.
□
Install the fill plug in the inlet control valve and tighten it securely.
Do not overfill the system. Overfilling the system with
oil can flood the sight glass window and make the
system appear empty.
!
!