www.vizi-tec.com
November 26, 2017
Page 9 of 24
Contact
Attribute#3 - MODULATION definitions:
(switch location)
SWT 1
SWT 2
SWT 3
SWT 4
SWT 5
SWT 6
SWT 7
SWT 8
SWT 9
SWT 10
SWT 11
SWT 12
Toggle Switch Position
Value
6=
Off
7=
Off
8=
Off
Standard
6=
Off
7=
Off
8=
On
Aggressive A
6=
Off
7=
On
8=
Off
Aggressive B
6=
Off
7=
On
8=
On
Aggressive C
6=
On
7=
Off
8=
Off
Aggressive D
6=
On
7=
Off
8=
On
Berserk A
6=
On
7=
On
8=
Off
Berserk B
6=
On
7=
On
8=
On
Berserk C
The third attribute. This can also be called the gain or rise of the profile. The lower the variable, the less modulation for a given
profile. The higher the variable, the more modulation. See appendix B (Pg.12) for a table of how the pulse number varies with the
profile time segments.
Examples:
If set to “0 0 0”= Standard” with grace period of 12 seconds and wait 36 seconds into the profile. 4 pulses will happen.
If attribute is set to “0 1 1” = Aggressive C and repeat above. 6 pulses will show.
From factory attribute may be set to “2=Standard”. This setting was carried over from SB1 and SB2 product default.
Note: Profile updates do not take effect until after the next brake cycle.
