www.vizi-tec.com
November 26, 2017
Page 8 of 24
Contact
Attribute#2 - FREQUENCY definitions:
(switch location)
SWT 1
SWT 2
SWT 3
SWT 4
SWT 5
SWT 6
SWT 7
SWT 8
SWT 9
SWT 10
SWT 11
SWT 12
Toggle Switch Position
Value
3=
Off
4=
Off
5=
Off
4 Hz
3=
Off
4=
Off
5=
On
6 Hz
3=
Off
4=
On
5=
Off
8 Hz
3=
Off
4=
On
5=
On
10 Hz
3=
On
4=
Off
5=
Off
12 Hz
3=
On
4=
Off
5=
On
14 Hz
3=
On
4=
On
5=
Off
16 Hz
3=
On
4=
On
5=
On
20 Hz
This attribute speaks for itself. It determines how fast or slow the modulation will be. The lower the frequency the slower the pulses.
The higher the frequency the quicker the pluses. Where 1 Hz = 1 pulse per second. 8 Hz = 8 pulses per seconds.
Note: If using filament bulbs such as the 1156 or 1157, best select the lower end of this spectrum due to the internal delay of the
bulbs switching between their ON and OFF states. If running LEDs this is not an issue as they switch much faster.
Example:
The lower the setting the more time (t) it will take. The higher the setting the less time it will take to output the same amount of
pulses.
Note: Profile updates do not take effect until after the next brake cycle.
t
t+n
t+2n
t+3n
0
Lower Hz
Higher Hz
.
.