www.vizi-tec.com
November 26, 2017
Page 6 of 24
Contact
Profile Selector:
(Usage = Manual)
The SBT-4K allows the user to reconfigure the behavior of the profile on the fly with its 12 selectable slide switches. Figure 1 shows
the slide switch. From left to right are positions 1 thru 12. The red arrow depicts toggle position 1 located far left. Shown in the “ON”
up position.
(Figure 1)
Below is the order of the 5 attributes and number of variables associated within:
Attribute #1
GRACE_PERIOD
position 1, 2
4 variables
(Page 6)
Attribute #2
FREQUENCY
position 3, 4, 5
8 variables
(Page 7)
Attribute #3
MODULATION
position 6, 7, 8
8 variables
(Page 8)
Attribute #4
SLOPE
position 9, 10
4 variables
(Page 9)
Attribute #5
DECAY
position 11, 12
4 variables
(Page 10)
To see a detailed listing of their variables go to page number as listed above.
Caution:
Testing the attributes may cause the battery to discharge. Consider running the engine while doing such configuration. Make sure to
have good air ventilation when performing such tests inside.
