VIVOTEK
User's Manual - 9
Below are the definitions for other combinations of LEDs:
Item LED status
Description
1 Blinking Green every 2 sec.
Audio mute (heartbeat)
2 Blinking Red every 0.15 sec. + Blinking Green every
1 sec.
Upgrading Firmware
3 Blinking Red every 0.15 sec. + Blinking Green every
0.15 sec.
Restoring default
Hardware Reset
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the video server to normal operation. If the system problems
remain after reset, restore the factory settings and install again.
Reset: Press and release the recessed reset button using a straightened paper clip. Wait for the
video server to reboot.
Restore: Press and hold the reset button down until the status LED rapidly blinks. It takes about
30 seconds. Note that all settings will be restored to factory default. Upon successful restore,
the status LED will blink green and red during normal operation.
Recessed Reset Button
USB & SD card
functions
are not available
on this unit.
USB function
is not available
on this unit.
■
VS8801
■
VS8401
USB & SD card
functions
are not available
on this unit.
USB function
is not available
on this unit.
Recessed Reset Button