VIVOTEK
User's Manual - 73
Custom Command
If
Custom Camera (scanner)
is selected as the PTZ driver,
the
Preset Position
and
PTZ Control
Panel
on the main page will be disabled. You will need to
configure command buttons to control the PTZ
scanner. Click
Custom Command
to open the Custom Command page to set the commands in the
Control Settings session. Please refer to your PTZ scanner user's manual to enter the commands in the
following fields.
Click
Save
to enable the settings and click
Close
to exit the page.
►
If you select DynaDome/
SmartDOME, Lilin PIH-7x00,
or Pelco D protocol as the PTZ
driver, the Control Settings
column will not be displayed.
►For all PTZ drivers,
a total
of five additional command
buttons can be configured.
NOTE: