VIVOTEK
User's Manual - 59
■ Enable deinterlace: Check to enable deinterlace, and choose
Adaptive mode
or
Blend mode
in the
drop-down list. Adaptive mode provides the best image quality, while Blend mode provides better
image quality (than not using the deinterlace function at all). Note that applying this function to all
channels at the same time will consume quite a lot computing power.
■ Enable edge enhancement: Check to enable edge enhancement, and drag the slider bar to adjust the
strength. Note that applying this function to all channels at the same time will consume quite a lot of
computing power.
■ Enable noise reduction: Check to enable noise reduction, and you can also choose to reduce
Gaussian
noise,
impulse
noise, or
Gaussian
and
impulse
noise in the drop-down list. Drag the
slide bar to adjust the strength. Noted that applying this function to all channels at the same time will
consume quite a lot of computing power.
■ Restore: Click to restore the default setting.
■ Save: When finished with the setting, you can choose to apply the settings to
Current channel, All
channels, Current channel and channel 2
, etc. in the drop-down list. Then click
Save
to enable the
settings.
Privacy Mask
Advanced Mode
Click
Privacy Mask
to open the settings page. On this page, you can block out sensitive zones to
address privacy concerns. Please choose the
Channel
first.
