VIVOTEK
10 - User's Manual
Network Deployment
Setting up the Video Server over the Internet
This section explains how to configure the
video server
to an Internet connection
.
1. Make video connection from the camera to the BNC video input.
2. Make audio connection from the Line-Out audio source to the RCA audio input.
3. Connect the Video Server to a switch via Ethernet cable.
4. Connect the power cable from the Video Server to a power outlet.
5. If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block. For detailed pin definition, please refer to the next page.
There are several ways to set up the
video server
over the Internet
.
The first way is to set up
the
video server
behind a router
.
The second way is to utilize a static IP
.
The third way is to use
PPPoE
.
OUT
CAMERA NO.
MIC
POWER
IN
VIDEO
OUT
1 2 3
OFF
ON
2
1
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
3
4
5
GbE Ethernet Switch
Analog Camera
